Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 789/1568
7.10.2.18 set metric
To set the metric of a route, use the
set metric
command in Route Map Configuration mode. This
command sets the Multi Exit Discriminator (MED) when used in a BGP context. When there are multiple
peering points between two autonomous systems (AS), setting the MED on routes advertised by one
router can influence the other AS to send traffic through a specific peer.
To remove a set command from a route map, use the
no
form of this command.
Syntax
set metric <value>
no set metric
Default Setting
None.
Command Mode
Route Map Config
Parameter
value:
A metric value, from 0 to 4,294,967,295 (any 32-bit integer).
