Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 243/1568
6.3.12.3
serviceport protocol
This command specifies the service port configuration protocol to be used. If you modify this value, the
change is effective immediately.
Syntax
serviceport protocol {bootp | dhcp | dhcp6 | none [dhcp6]}
<bootp>
- Obtains IP address from BOOTP.
<dhcp>
- Obtains IP address from DHCP.
<dhcp6>
- Obtains IPv6 address from DHCPv6.
<none>
- Obtains IP address by setting configuration.
<none dhcp6>
- Obtains IPv6 address by setting configuration.
Default Setting
None
Command Mode
Global Config
6.3.12.4
serviceport protocol dhcp6 restart
This command is used to initiate a DHCPv6 client request by service port interface.
Syntax
serviceport protocol dhcp6 restart
Default Setting
None
Command Mode
Global Config
