Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 23/1568
2.4
Quick Starting the Switch
1. Read the device Installation Guide for the connectivity procedure. In-band connectivity allows access
to the JetNet 7852G-4XG Switch locally. From a remote workstation, the device must be configured
with IP information (IP address, subnet mask, and default gateway).
2. Turn the Power ON.
3. Allow the device to load the software until the login prompt appears. The device initial state is called
the default mode.
4. When the prompt asks for operator login, do the following:
Type the word
admin
in the login area. Since a number of the Quick Setup commands require
administrator account rights, suggesting logging into an administrator account.
Enter a default password
admin
Press the <Enter> key.
The CLI Privileged EXEC mode prompt will be displayed.
Use
“configure” to switch to the Global Config mode from Privileged EXEC.
Use
“exit” to return to the previous mode.
