Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 101/1568
6.2.3.20
switchport forbidden vlan
This command used to configure forbidden VLANs.
Syntax
switchport forbidden vlan {add | remove} <vlan-list>
no switchport forbidden
<vlan-list> -
VLAN ID (Range: 1
– 4093) – separate non-consecutive IDs with ',' and no spaces and
no zeros in between the range; Use '-' for range.
add -
VLAND ID to add.
remove -
VLAND ID to remove.
no -
Remove the list of forbidden VLANs.
Default Setting
None
Command Mode
Interface Config
6.2.3.21
switchport priority
This command configures the default 802.1p port priority assigned for untagged packets for a specific
interface.
Syntax
switchport priority <0-7>
no switchport priority
<0-7> -
The range for the priority is 0 - 7.
no
–
This command restore the priority configuration to default value.
Default Setting
0
Command Mode
Interface Config
