Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 865/1568
8.2.1.3
show ip igmp interface
This command displays the IGMP information for the interface.
Syntax
show ip igmp interface {<slot/port> | vlan <vlan-id>}
<slot/port> -
Valid slot and port number separated by forward slashes.
<vlan-id> -
VLAN ID. The range of VLAN ID is 1 to 4093.
Default Setting
None
Command Mode
Privileged
Exec User
EXEC
Display Message
Slot/Port:
Valid slot and port number separated by forward slashes.
IGMP Admin Mode:
This field displays the administrative status of IGMP. This is a configured
value.
Interface Mode:
This field indicates whether IGMP is enabled or disabled on the interface. This is a
configured value.
IGMP Version:
This field indicates the version of IGMP running on the interface. This value can be
configured to create a router capable of running either IGMP version 1 or 2.
Query Interval (secs):
This field indicates the frequency at which IGMP Host-Query packets are
transmitted on this interface. This is a configured value.
Query Max Response Time (1/10 of a second):
This field indicates the maximum query response
time advertised in IGMPv2 queries on this interface. This is a configured value.
Robustness:
This field displays the tuning for the expected packet loss on a subnet. If a subnet is
expected to be have a lot of loss, the Robustness variable may be increased for that interface. This
is a configured value.
Startup Query Interval (secs):
This value indicates the interval between General Queries sent by a
Querier on startup. This is a configured value.
Startup Query Count:
This value is the number of Queries sent out on startup, separated by the
Startup Query Interval. This is a configured value.
Last Member Query Interval (1/10 of a second):
This value indicates the Maximum Response
Time inserted into Group-Specific Queries sent in response to Leave Group messages. This is a
configured
value.
Last Member Query Count:
This value is the number of Group-Specific Queries sent before the
router assumes that there are no local members. This is a configured value.
