Korenix JetNet 7852G-4XG Series, User Manual

Page: 1270 / 1568

Korenix Technology Co., Ltd. Industrial Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual Page: 1270/1568

Default

Reauthenticate

If the termination action is 'default' then at the end of the session, the client details are initialized .
Otherwise re-authentication is attempted.

Logical Port - This field displays the logical port number associated with the supplicant that is
connected to the port. This field is not configurable. This field is displayed when the port control mode
of the selected port is mac-based.

Supplicant MAC Address - This field displays the supplicant's MAC address that is connected to
the port. This field is not configurable. This field is displayed when the port control mode of the
selected port is mac-based.

Authenticator PAE State- This field displays the current state of the authenticator PAE state
machine. This field is present only when the port control mode for the selected interface is
mac-based.Possible values are:

"Initialize"

"Disconnected"

"Connecting"

"Authenticating"

"Authenticated"

"Aborting"

"Held"

"ForceAuthorized"
Backend Authentication State - This field displays the current state of the backend authentication
state machine.This field is present only when the port control mode for the selected interface is
mac-based. Possible values are:

"Request"

"Response"

"Success"

"Fail"

"Timeout"

"Initialize"

"Idle"
VLAN Assigned - This field displays the VLAN ID assigned to the supplicant by the Authenticator.
This field is not configurable. This field is displayed when the port control mode of the selected port is
mac-based.
VLAN Assigned Reason - This field displays reason for the VLAN ID assigned by the
authenticator.This field is not configurable. This field is displayed when the port control mode of the
selected port is mac-based.
If the termination action is Default then, at the end of the session, the client details are initialized.
Otherwise, re-authentication is attempted. Note: This field is displayed only when the port control
mode of the selected port is not MAC-based.
Command Buttons
Refresh - Update the information on the page.