Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 765/1568
7.9.2.7
ip vrrp priority
This command sets the priority value for the virtual router configured on a specified interface.
The router with the highest priority is elected master. If a router is configured with the address used
as the address of the virtual router, the router is called the "address owner". The priority of the
address owner is always 255 so that the address owner is always master. If the master has a priority
less than
255 (it is not the address owner) and you configure the priority of another router in the group higher
than the master's priority, the router will take over as master only if preempt mode is enabled.
Syntax
ip vrrp <1-255> priority <1-254>
no ip vrrp <1-255> priority
<1-255> -
The range of virtual router ID is 1 to 255.
<1-254> -
The range of priority is 1 to 254.
<no> -
This command sets the default priority value for the virtual router configured on a
specified interface.
Default Setting
The default priority value is 100 unless the router is the address owner, in which case its priority
is automatically set to 255.
Command Mode
Interface Config
