Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 709/1568
7.3.2.17
area virtual-link authentication
area virtual-link authentication
command configures the authentication type and key for the OSPF
virtual interface identified by
<areaid>
and
<neighbor>
. The
<neighbor>
parameter is the Router ID of
the neighbor. The value for
<type>
is either none, simple, or encrypt. The
[key]
is composed of
standard displayable, non-control keystrokes from a Standard 101/102-key keyboard. The
authentication key must be 8 bytes or less if the authentication type is simple. If the type is encrypt, the
key may be up to 16
bytes. Unauthenticated interfaces do not need an authentication key. If the type is encrypt, a key id in
the range of 0 and 255 must be specified.The default value for authentication type is none. Neither the
default password key nor the default key id are configured.
no area virtual-link authentication
command configures the default authentication type for the
OSPF virtual interface identified by
<areaid>
and
<neighbor>
. The
<neighbor>
parameter is the
Router ID of the neighbor.
Syntax
area <areaid> virtual-link <neighbor> authentication {none | {simple <key>} | {encrypt <key> <keyid>}}
no area <areaid> virtual-link <neighbor> authentication
Default Setting
None
Command Mode
Router OSPF Config Mode
7.3.2.18
area virtual-link dead-interval
area virtual-link dead-interval
command configures the dead interval for the OSPF virtual interface
on the virtual interface identified by
<areaid>
and
<neighbor>.
The
<neighbor>
parameter is the
Router ID of the neighbor. The range for seconds is 1 to 65535.
no area virtual-link dead-interval
command configures the default dead interval for the OSPF virtual interface on the virtual interface
identified by
<areaid>
and
<neighbor>
. The
<neighbor>
parameter is the Router ID of the neighbor
Syntax
area <areaid> virtual-link <neighbor> dead-interval <seconds>
no area <areaid> virtual-link <neighbor> dead-interval
Default Setting
40
Command Mode
Router OSPF Config Mode
