Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1363/1568
Selection Criteria
Traffic Type
- Traffic type is used to define the DiffServ Class. Traffic type options: VOIP, HTTP,
FTP, Telnet, and Any.
Policing
- Enabling policing will add policing to the DiffServ Policy and the policing rate will be
applied.
Outbound Priority
- When Policing is enabled, Outbound Priority defines the type of policing
conform action where: High sets action to markdscp ef, Med sets action to markdscp af31, and Low
sets action to send. W hen Policing is disabled, Outbound Priority defines the policy where: High sets
policy to mark ipdscp ef, Med sets policy to mark ipdscp af31, Low set policy to mark ipdscp be.
Class Layer 3 Protocol
- Indicates how to interpret the any layer 3. This lists types of packets
supported by Diffserv. Layer 3 Protocol option is available only when user selects class type as 'All' .
Options:
IPv4
IPv6
Configurable Data
Ports to Include in Config
- List the ports which can be configured to support a DiffServ policy. The
DiffServ policy will be added to selected ports.
Committed Rate
- W hen Policing is enabled, the committed rate will be applied to the policy and the
policing action is set to conform. When Policing is disabled, the committed rate is not applied and the
policy is set to markdscp.
Command Buttons
Submit
- Send the updated screen to the switch and cause the changes to take effect on the switch,
but these changes will not be retained across a power cycle unless a save operation is performed.
