Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 886/1568
This command displays the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all the entries
in the multicast mroute table containing the given <groupipaddr>.
Syntax
show ip mcast mroute group <groupipaddr> {detail |summary}
< groupipaddr > -
the IP Address of the destination of the multicast packet.
detail -
Display the multicast routing table details.
summary -
Display the multicast routing table summary.
Default Setting
None
Command Mode
Privileged
Exec User
Exec
Display Message
If the
detail
parameter is specified the follow fields are displayed:
Source IP:
This field displays the IP address of the multicast data source.
Group IP:
This field displays the IP address of the destination of the multicast packet.
Expiry Time (secs):
This field displays the time of expiry of this entry in seconds.
Up Time (secs):
This field displays the time elapsed since the entry was created in seconds.
RPF Neighbor:
This field displays the IP address of the RPF neighbor.
Flags:
This field displays the flags associated with this entry.
If the
summary
parameter is specified the follow fields are displayed:
Source IP:
This field displays the IP address of the multicast data source.
Group IP:
This field displays the IP address of the destination of the multicast packet.
Protocol
This field displays the multicast routing protocol by which this entry was created.
Incoming Interface:
This field displays the interface on which the packet for this group
arrives.
Outgoing Interface List:
This field displays the list of outgoing interfaces on which this packet
is forwarded.
