Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1499/1568
11.7.9.2
Configuring RIPv6 Interface Configuration Page
Selection Criteria
Interface
- Select the interface for which data is to be configured.
Configurable Data
Interface Mode
- Select enable or disable from the pulldown menu. Before you enable RIPv6
version 1 or version 1c on an interface, you must first enable network directed broadcast mode on
the corresponding interface. The default value is disabled.
Passive Interface
- Select enable or disable from the pulldown menu. The default value is disabled.
Command Buttons
Submit
- Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.