Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1265/1568
Reauthenticate
- This button begins the reauthentication sequence on the selected port. This button
is only selectable if the control mode is 'auto'. If the button is not selectable, it will be grayed out.
Once this button is pressed, the action is immediate. It is not required to press the Submit button for
the action to occur.
Submit
- Sends the updated screen to the switch and causes the changes to take effect on the
switch but these changes will not be retained across a power cycle unless a save is performed.
Refresh
- Update the information on the page.
11.4.1.3
Configuring Port Access Control PAE Capability
Selection Criteria
Interface
- the port to be configured. W hen the selection is changed, a screen refresh will occur
causing all fields to be updated for the newly selected port. All physical interfaces are valid.
Configurable Data
PAE Capabilities
- This selector lists the options for Port Access Entity (PAE) configuration. The
options are:
authenticator: Port Access Entity (PAE) is set to Authenticator.
supplicant: Port Access Entity (PAE) is set to Supplicant.
Command Buttons
Submit
- Update the switch with the values on the screen. If you want the switch to retain the new
values across a power cycle you must perform a save.
Refresh
- Refresh the data on the screen with the present state of the data in the switch.
