Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1252/1568
12.3.25.2 Configuring MLAG Port
Selection Criteria
Interface
- You can use this to set up parameter for a interface.
Configurable Data
MLAG ID
- To move other port channels into a Multi-chassis Link Aggregation (MLAG) to connect to
the downstream device, use the mlag command. The range is from 1 and 4096.
Command Buttons
Submit
- Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.
12.3.25.3 Viewing MLAG Configuration Summary
Selection Criteria
MLAG Status
- You can use this to see MLAG parameters for an interface(s).
Non-Configurable Data
