Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1400/1568
11.6.3.7
Configuring OSPF Interface
Selection Criteria
Interface
- Select the interface for which data is to be displayed or configured.
Configurable Data
OSPF Area ID
- Enter the 32 bit integer in dotted decimal format that uniquely identifies the OSPF
area to which the selected router interface connects. If you assign an Area ID which does not
exist, the area will be created with default values. Leave blank to disable.
Router Priority
- Enter the OSPF priority for the selected interface. The priority of an interface is
specified as an integer from 0 to 255. The default is 1, which is the highest router priority. A value
of
'0' indicates that the router is not eligible to become the designated router on this network
Retransmit Interval (secs)
- Enter the OSPF retransmit interval for the specified interface. This is
the number of seconds between link-state advertisements for adjacencies belonging to this
router interface. This value is also used when retransmitting database descriptions and link-state
request packets. Valid values range from 1 to 3600 seconds (1 hour). The default is 5 seconds.
Hello Interval (secs)
- Enter the OSPF hello interval for the specified interface in seconds.
This parameter must be the same for all routers attached to a network. Valid values range
from 1 to
65,535. The default is 10 seconds.
Dead Interval (secs)
- Enter the OSPF dead interval for the specified interface in seconds. This
specifies how long a router will wait to see a neighbor router's Hello packets before declaring that
the router is down. This parameter must be the same for all routers attached to a network. This
value should a multiple of the Hello Interval (e.g. 4). Valid values range from 1 to 2147483647. The
default is 40.
