Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1296/1568
11.4.3.10
Captive Portal Local User Configuration Page
Configurable Data
User Name
- Enter the name of the user.
Password
- Enter a password for the user. The password length can be from 8 to 64 characters.
User Group
- Assign the user to at least one User Group. To assign a user to more than one group,
press the Ctrl key and click each group.
New users are assigned to the 1-Default user group by default.
Session Timeout
- Shows the number of seconds a user is permitted to remain connected to the
network. Once the Session Timeout value is reached, the user is logged out automatically.
Idle Timeout
- Enter the number of seconds the user can remain idle before the switch automatically
logs the user out. A value of 0 means that the user does not have an idle timeout limit.
Max Up Rate
- Enter the maximum speed, in bytes per second, that the user can transmit traffic
when using the captive portal. This setting limits the bandwidth at which the user can send data into
the network.
Max Down Rate
- Enter the maximum speed, in bytes per second, that the user can receive traffic
when using the captive portal. This setting limits the bandwidth at which the user can receive data
from the network.
Max Receive
- Enter the maximum number of bytes that the user is allowed to receive when using
the captive portal. After this limit has been reached the user will be disconnected.
Max Transmit
- Enter the maximum number of bytes that the user is allowed to transmit when using
the captive portal. After this limit has been reached the user will be disconnected.
Max Total
- Enter the maximum number of bytes the user is allowed to transfer (sum of bytes
transmitted and received). After this limit has been reached the user will be disconnected.
Command Buttons
Delete
– Click Delete to remove the user from the local database.
Submit
- Update the switch with the values on the screen. If you want the switch to retain the new
values across a power cycle you must perform a save.
