Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 305/1568
6.6.2.2
Mail Server configuration
To configure the parameters for SMTP server to which the switch sends email alert messages and
changes the mode to Mail Server Configuration mode.
Syntax
mail-server { <ipaddress> | <ipv6address> | <hostname> }
no mail-server
no -
This command removes the specified SMTP server from the configuration.
Default Setting
None
Command Mode
Global Config
To configure the email alerting security protocol by enabling the switch to use TLSv1/STARTTLS
authentication with the SMTP Server. If the TLSv1/STARTTLS mode is enabled on the switch but the
SMTP server does not support TLSv1/STARTTLS mode, no email is sent to the SMTP server.
Syntax
security { none | tlsv1 | starttls }
none -
no security protocol is used.
tlsv1 -
To use tlsv1 as security protocol to authenticate with the SMTP server
starttls -
To use starttls as security protocol to authenticate with the SMTP server.
no -
This command resets the security protocol back to default value.
Default Setting
none
Command Mode
Mail-Server Config