Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1482/1568
originate a network-LSA for the network node. The network- LSA will contain links to all
routers (including the Designated Router itself) attached to the network.
Backup Designated Router
- This router is itself the Backup Designated Router on the
attached network. It will be promoted to Designated Router if the present Designated Router
fails. The router establishes adjacencies to all other routers attached to the network. The
Backup Designated Router performs slightly different functions during the Flooding
Procedure, as compared to the Designated Router.
Other Designated Router
- The interface is connected to a broadcast or NBMA network on
which other routers have been selected to be the Designated Router and Backup Designated
Router either. The router attempts to form adjacencies to both the Designated Router and
the Backup Designated Router.
The State is only displayed if the OSPFv3 admin mode is enabled.
Designated Router
- The identity of the Designated Router for this network, in the view of the
advertising router. The Designated Router is identified here by its router ID. The value 0.0.0.0 means
that there is no Designated Router. This field is only displayed if the OSPFv3 admin mode is enabled.
Backup Designated Router
- The identity of the Backup Designated Router for this network, in the
view of the advertising router. The Backup Designated Router is identified here by its router ID. Set
to 0.0.0.0 if there is no Backup Designated Router. This field is only displayed if the OSPFv3 admin
mode is enabled.
Number of Link Events
- This is the number of times the specified OSPFv3 interface has changed
its state. This field is only displayed if the OSPFv3 admin mode is enabled.
Command Buttons
Submit
- Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
