Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 811/1568
7.11.1.13 show ip bgp update-group
This command displays information about the Border Gateway Protocol (BGP) update groups.
Syntax
show ip bgp update-group [index-group | peeripadd]
index-group -
Update group type with its corresponding index number. The range of update-group
index numbers is from 1 to 4294967295.
peeripadd -
IP address of a single neighbor who is a member of an update group.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Update Group:
Update-group number.
Peer Type:
Update-group type (internal or external).
Minimum Advertisement Interval:
Minimum time, in seconds, between update advertisements.
Neighbor AS Path Access List Out:
Neighbor AS Path list out. All members of the group use the
same.
Neighbor Prefix List Out:
Neighbor prefix list out. All members of the group use the same.
Neighbor Route Map Out:
Neighbor route map out. All members of the group use the same.
Members Added:
Number of members added to the group.
Members Removed:
Number of members removed from the group.
Update Version:
Number of times phase 3 of the decision process has run for the group.
Number of UPDATES Sent:
Number of UPDATE packets sent to this group.
Time Since Last UPDATE:
Number of seconds since last UPDATE sent to group.
Current Prefixes:
Number of prefixes currently advertised to the group.
Current Paths:
Number of paths in update group's Adj-RIB-Out.
Prefixes Advertised:
Number of prefixes advertised.
Prefixes Withdrawn:
Number of prefixes withdrawn.
UPDATE Send Failures:
Tx of UPDATE message failed to one or more group members.
Current Members:
Number of member listed by IP address in the update group.
Version:
The number of times decision process phase 3 had run before this history table entry.
