Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1104/1568
first time-out before attempting to use the next configured server when configured in unicast mode.
Allowed range is (0 to 10). Default value is 1.
Command Buttons
Submit
- Sends the updated configuration to the switch. Configuration changes take effect
immediately.
11.2.9.2
Viewing SNTP Global Status Page
Non-Configurable Data
Version
- Specifies the SNTP Version the client supports.
Supported Mode
- Specifies the SNTP modes the client supports. Multiple modes may be
supported by a client.
Last Update Time
- Specifies the local date and time (UTC) the SNTP client last updated the
system clock.
Last Attempt Time
- Specifies the local date and time (UTC) of the last SNTP request or receipt of
an unsolicited message.
Last Attempt Status
- Specifies the status of the last SNTP request or unsolicited message for both
unicast and broadcast modes. If no message has been received from a server, a status of Other is
displayed. These values are appropriate for all operational modes.
Other
-
None of the following enumeration values.
Success
- The SNTP operation was successful and the system time was updated.
Request Timed Out
- A directed SNTP request timed out without receiving a response from
the SNTP server.
Bad Date Encoded
- The time provided by the SNTP server is not valid.
Version Not Supported
– The SNTP version supported by the server is not compatible with
the version supported by the client.
Server Unsynchronized
- The SNTP server is not synchronized with its peers. This is
indicated via the 'leap indicator' field on the SNTP message.
