Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 369/1568
6.9.4.7 Captive-portal trapflags
This command enables captive portal SNMP traps. If no parameters are specified, then all traps are
enabled. SNMP traps can also be enabled individually by supplying the optional parameters.
Syntax
trapflags [client-auth-failure| client-connect | client-db-full | client-disconnect]
no trapflags [client-auth-failure | client-connect | client-db-full | client-disconnect]
Default Setting
Disable
Command Mode
Captive Portal Config
6.9.4.8
Captive Portal local user parameters
This command assigns/modifies the group name for the associated captive portal user. The <user-id>
variable is the user ID, which is a number in the range of 1 to 128. The <group-name> variable is a name
up to 32 characters.
Syntax
user <1-128> group <1-10>
no user <1-128> [group <1-10>]
Default Setting
None
Command Mode
Captive Portal Config