![background image](http://html1.mh-extra.com/html/omron/cj1w-nc271-12-2009/cj1w-nc271-12-2009_operation-manual_742348406.webp)
378
Torque Limits
Section 10-4
The SMARTSTEP Junior Servo Drives do not support torque control. The fol-
lowing settings and functions cannot be used.
10-4-2 Constant Torque Limits
G5-series Servo Drives
To apply a constant torque limit to axis operation, set the Servo Parameters
No.1 Torque Limit
(Pn013) and
No.2 Torque Limit
(Pn522). By setting these
parameters, the output torque of the operating Servomotor will always be lim-
ited by the set ratio of the rated torque. Also by setting the
Torque Limit Selec-
tion
(Pn521), the forward torque limit and reverse torque limit will be as shown
in the following table.
Torque Limit Parameters
G-series Servo Drives
To apply a constant torque limit to axis operation, set the Servo Parameters
No.1 Torque Limit
(Pn05E) and
No.2 Torque Limit
(Pn05F). By setting these
parameters, the output torque of the operating Servomotor will always be lim-
ited by the set ratio of the rated torque. Also by setting the
Torque Limit Selec-
tion
(Pn003), the forward torque limit and reverse torque limit will be as shown
in the following table.
Torque Limit Parameters
W-series Servo Drives
To apply constant torque limits to axis operation, set the Servo Parameters
Forward Torque Limit
(Pn402) and
Reverse Torque Limit
(Pn403). By setting
this parameter, the output torque of the operating Servomotor will always be
limited by the set ratio of the rated torque.
Torque Limit Parameters
Parameter
No.
Set value
Forward torque limit Reverse torque limit
Pn521
0.1
Pn013
Pn013
2
Pn013
Pn522
Type
Parameter
No.
Parameter name
Unit
Setting
range
Data
length
Default
setting
---
Pn013
No.1 torque limit
%
0 to 500
2
500
---
Pn522
No.2 torque limit
%
0 to 500
2
500
Parameter
No.
Set value
Forward torque limit Reverse torque limit
Pn003
1
Pn05E
Pn05E
2
Pn05E
Pn05F
Type
Parameter
No.
Parameter name
Unit
Setting
range
Data
length
Default
setting
---
Pn05E
No.1 torque limit
%
0 to 500
2
300
---
Pn05F
No.2 torque limit
%
0 to 500
2
100
Type
Parameter
No.
Parameter name
Unit
Setting
range
Data
length
Default
setting
---
Pn402
Forward torque limit
%
0 to 800
2
350
---
Pn403
Reverse torque limit
%
0 to 800
2
350
Содержание CJ1W-NC271 - 12-2009
