Omron CJ1W-NC271 - 12-2009, Руководство по эксплуатации

Страница: 626 / 687

598
Operation Area I/O Allocations
Appendix C
Note The REJOIN Bit and the Axes to Connect parameter are supported for unit version 2.0 or later. The allo-
cated bit and word are not used for earlier unit versions.
Output
(CPU
Unit to
PCU) n+6 --- Operating
data for
data trans-
fer Number of write
words Specifies the number of words to be written to the
PCU.
n+7 --- Write source area Specifies the area of the data to be written to the
PCU.
00B0 hex: CIO Area
00B1 hex: WR Area
00B2 hex: HR Area
00B3 hex: AR Area
0082 hex: DM Area
005
@
hex: EM Area
@
: EM bank No.= 0 to 9, A, B, C
n+8 --- Write source word Specifies in hexadecimal the beginning word of the
area for the data to be written to the PCU.
n+9 --- Write destination
address Specifies the write destination address in the PCU.
n+10 --- Number of read
words Specifies the number of words to be read from the
PCU.
n+11 --- Read source
address Specifies the read source address in the PCU.
n+12 --- Read destination
area Specifies the area used to store the data read from
the PCU.
00B0 hex: CIO Area
00B1 hex: WR Area
00B2 hex: HR Area
00B3 hex: AR Area
0082 hex: DM Area
005
@
hex: EM Area
@
: EM bank No.= 0 to 9, A, B, C
n+13 --- Read destination
word Specifies in hexadecimal the beginning word of the
area where the data read from the PCU is stored.
n+14 --- --- Not used (reserved
by the system). ---
I/O Word Bits Category Name Function