manualshive.com logo in svg

Omron CJ1W-NC271 - 12-2009, Руководство по эксплуатации

Омрон CJ1W-NC271 - компактный модуль ввода/вывода для автоматизации производства. Для более эффективного использования устройства рекомендуется загрузить бесплатное руководство по эксплуатации с нашего сайта. Подробная информация о настройке и использовании модуля доступна для скачивания на manualshive.com.

Поделиться
Скачать
background image

xi

About this Manual:

This manual describes the installation and operation of the CJ1W-NC271/NC471/NCF71/NCF71-MA
and CS1W-NC271/NC471/NCF71 Position Control Units and includes the sections described below.

Please read this manual carefully and be sure you understand the information provided before
attempting to install or operate the Position Control Unit. Be sure to read the precautions provided in
the following section.

Precautions

 provide general precautions for using the Position Control Unit, Programmable Controller,

and related devices.

Section 1 

introduces the features of the Position Control Unit, explains the system configuration in

which it is used, and also provides information on basic operations, functions and specifications.

Section 2 

provides an overview of the procedures required to use the Position Control Unit.

Section 3 

provides information on nomenclature and functions, and describes the procedures required

for wiring and installation. Information on the MECHATROLINK-II I/F Unit is also provided.

Section 4 

provides an overview of the parameter and data settings used in Position Control Unit oper-

ation and provides information on memory allocations.

Section 5 

explains how to transfer and save parameters and data using the data transfer bits. 

Section 6 

provides an overview of MECHATROLINK communications, and includes information on

settings and procedures required to use MECHATROLINK with the Position Control Unit.

Section 7 

provides an overview of the control system used by the Position Control Unit, including infor-

mation on the control units, coordinate system, acceleration/deceleration operations, and limit input
operations.

Section 8 

provides information on the various operations used to determine the origin, including origin

searches, origin returns, presetting the present position, calculating phase Z margins, and using the
absolute encoder.

Section 9 

provides an overview of direct operation and describes the parameter settings, data set-

tings, and procedures required to perform direct operation. Information on interrupt feeding and torque
limits is also provided here.

Section 10 

describes the servo lock/unlock, jogging, override, torque limits, speed control, torque con-

trol, backlash compensation, software limits, and stop functions.

Section 11 

provides basic program examples and application examples for using the Position Control

Unit.

Section 12 

provides information on troubleshooting errors that may occur, including details on the

meaning of indicator displays and error codes, and the procedures required to reset errors in the Unit
or axes.

Section 13 

describes methods for inspecting and maintaining the Position Control Unit and the proce-

dure required to replace a Position Control Unit.

The 

Appendices

 provide information on the performance characteristics, lists of parameters, I/O allo-

cations in the operation areas, lists of error codes, alarm/warning displays, and information required
when changing to the CJ1W-NC271/NC471/NCF71/NCF71-MA or CS1W-NC271/NC471/NCF71 from
a CJ1W/CS1W-NC113/133/213/233/413/433 Position Control Unit.

!WARNING

Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.

Содержание CJ1W-NC271 - 12-2009
















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CJ1W-NC271 - 12-2009

Gantner E Series Communications Manual preview
E Series
Бренд: Gantner Страницы: 56
Camozzi PRE Series Operation And Maintenance Instructions preview
PRE Series
Бренд: Camozzi Страницы: 33
Camozzi K8 Series Use And Maintenance Instructions preview
K8 Series
Бренд: Camozzi Страницы: 2
Camozzi PME Series Operation & Maintenance Instructions Manual preview
PME Series
Бренд: Camozzi Страницы: 64
Zeagle Razor Service Manual preview
Razor
Бренд: Zeagle Страницы: 37
Racal Instruments 1260 Manual preview
1260
Бренд: Racal Instruments Страницы: 94
Racal Instruments 1260 User Manual preview
1260
Бренд: Racal Instruments Страницы: 97
Maguire Products GRAVIMETRIC AUGER FEEDER MGF-ST Instruction Manual preview
GRAVIMETRIC AUGER FEEDER MGF-ST
Бренд: Maguire Products Страницы: 47
Magtrol DSP7000 User Manual preview
DSP7000
Бренд: Magtrol Страницы: 160
Parker A4W Series Installation And Service Information preview
A4W Series
Бренд: Parker Страницы: 12
Fingertips Lab O6 Quick Start Manual preview
O6
Бренд: Fingertips Lab Страницы: 15
bihl+Wiedemann BW3489 Installation Instructions Manual preview
BW3489
Бренд: bihl+Wiedemann Страницы: 16
Allen-Bradley 1756-L72EROM Installation Instructions Manual preview
1756-L72EROM
Бренд: Allen-Bradley Страницы: 16
D+H RCM 230-11-U Original Instructions preview
RCM 230-11-U
Бренд: D+H Страницы: 2
Harman FG2106-04 Quick Start Manual preview
FG2106-04
Бренд: Harman Страницы: 2
Linear Technology LT3507 Demo Manual preview
LT3507
Бренд: Linear Technology Страницы: 6
Nortek WRC4 Owner'S Manual preview
WRC4
Бренд: Nortek Страницы: 24
Intellitec iConnex User Manual preview
iConnex
Бренд: Intellitec Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды