![background image](http://html1.mh-extra.com/html/omron/cj1w-nc271-12-2009/cj1w-nc271-12-2009_operation-manual_742348415.webp)
387
Speed Control
Section 10-5
Pn002.0 is used to select the function of the option command value for speed
control. The option command value for speed control is described in the fol-
lowing pages.
The data length for Pn002.0 is the set value specified to transfer Pn002
(including Pn002.0) when transferring Servo Parameters.
Pn502 is set as the detection threshold of the Zero Speed Flag (word b+1, bit
08) in the Axis Operating Input Memory Area. Pn503 is set as the detection
width of the Speed Conformity Flag (word b+1, bit 07) in the Axis Operating
Input Memory Area.
Axis Operating Output Memory Areas (Operating Commands)
Name
Word
Bits
Contents
DECELERATION STOP
a
15
0
→
1: Starts deceleration stop.
SPEED CONTROL
a+1
02
0
→
1: Starts speed control.
EMERGENCY STOP
15
0
→
1: Starts emergency stop.
Speed command value
(for speed control)
a+6
a+7
---
Speed command value (rightmost word)
Speed command value (leftmost word)
Unit: 0.001%
(percentage of Servomotor's momentary maximum rotation speed)
Command range:
−
199.999% to 199.999%
(FFFCF2C1 to 00030D3F hex)
Note
The rotation direction is determined by the sign.
Option command value 1 a+10
a+11
---
Torque limit/torque feed forward (rightmost word)
Torque limit/torque feed forward (leftmost word)
Unit: %
(percentage of Servomotor’s momentary maximum torque)
Command range: 0% to 399% (See note.)
(00000000 to 0000018F hex)
When using G5-series Servo Drives, the option command value 1 can be
used as the torque limit command value or torque feed forward command
value by setting the Servo Parameter
Torque Limit Selection
(Pn521).
When using G-series Servo Drives, the option command value 1 can be
used as the torque limit command value or torque feed forward command
value by setting the Servo Parameter
Torque Limit Selection
(Pn003).
When using W-series Servo Drives, the option command value 1 can be
used as the torque limit command value or torque feed forward command
value by setting
Torque Command Input Change
in Servo Parameter
Func-
tion Selection Application Switch 2
(Pn002.0).
Option command value 2 a+12
a+13
---
Torque limit (rightmost word)
Torque limit (leftmost word)
Unit: %
(percentage of Servomotor’s momentary maximum torque)
Command range: 0 to 399% (See note.)
(00000000 to 0000018F hex)
When using G5-series Servo Drives, the option command value 2 can be
used as the torque limit command value or torque feed forward command
value by setting the Servo Parameter
Torque Limit Selection
(Pn521).
When using G-series Servo Drives, the option command value 2 can be
used as the torque limit command value or torque feed forward command
value by setting the Servo Parameter
Torque Limit Selection
(Pn003).
When using W-series Servo Drives, the option command value 2 can be
used as the torque limit command value by setting
Torque Command Input
Change
in Servo Parameter
Function Selection Application Switch 2
(Pn002.0).
Содержание CJ1W-NC271 - 12-2009
