![background image](http://html1.mh-extra.com/html/omron/cj1w-nc271-12-2009/cj1w-nc271-12-2009_operation-manual_742348380.webp)
352
Interrupt Feeding
Section 9-5
9-5-3
Data Settings for Using Interrupt Feeding
To execute interrupt feeding, the following parameters and data must be set in
addition to the parameters and data required for direct operation.
Axis Parameter Area
Interrupt Input Signal Parameters
d = 1860 hex + (Axis No.
−
1)
×
14 hex
When using external latch signals 1 to 3, the external latch signal to be used
must be allocated in the Servo Drive's external input allocations.
When using a SMARTSTEP Junior Servo Drive, only 00 (phase Z) and 01
(external latch signal 1) can be used for the origin input signal selection.
Servo Parameter Area
Interrupt Feeding Parameters
Set the travel distance from the position at which the interrupt input signal is
input. The travel direction for when the interrupt input signal is input is deter-
mined by the sign (positive or negative) in the set value. The operation per-
formed when the interrupt input signal is input depends on the sign for this
parameter and the sign of the position command value for direct operation, as
follows:
Note
Starting in Position Control Unit with version 2.0 and later, the
External Posi-
tioning Final Travel Distance
for G5-series Servo Drives (Pn820), the
Final
Distance for External Input Positioning
for G-series Servo Drives (Pn203) or
PCU's
address
Contents
Setting
Bits 08 to 15
Bits 00 to 07
d
Origin input sig-
nal selection
Interrupt input
signal selection
Interrupt input signal selection
00: Phase Z
01: External latch signal 1 input
02: External latch signal 2 input
03: External latch signal 3 input
Parameter name for G
Series (Parameter
name for W Series)
Unit
Setting range
Paramet
er size
Default
setting
G5
Series
G Series W Series
and
SMARTS
TEP
Junior
Series
Final distance for exter-
nal input positioning
(Final travel distance for
external positioning)
Command unit
−
1,073,741,823 to
1,073,741,823
4
100
Pn820
Pn203
Pn814
Position command
value for direct
operation
Servo parameter Pn203/Pn814/Pn820 (External
Positioning Final Travel Distance)
Positive value
Negative value
Positive value
When the interrupt input sig-
nal is input, interrupt feeding
is executed in the same direc-
tion as the travel direction
when movement was started.
When the interrupt input sig-
nal is input, interrupt feeding
is executed in the opposite
direction from the travel direc-
tion when movement was
started.
(Reversal mode operation)
Negative value
When the interrupt input sig-
nal is input, interrupt feeding
is executed in the opposite
direction from the travel direc-
tion when movement was
started.
(Reversal mode operation)
When the interrupt input sig-
nal is input, interrupt feeding
is executed in the same direc-
tion as the travel direction
when movement was started.
Содержание CJ1W-NC271 - 12-2009
