HARDWIRE
WIRELESS
G E M - P 8 1 6
CONTROL PANEL/COMMUNICATOR
Programming the GEM-P816 Control Panel with the
"Classic"
GEM-RP1CAe2
Keypad and the "K Series"
GEM-K1CA
Keypad
WI995E 5/08
© NAPCO 2008
Quick Start (for "Classic" GEM-RP1CAe2)
1. Refer to the wiring diagram, connect Siren, Aux. Power,
PGM Output, Remote Bus, Earth ground, Zone and Tele-
phone wiring. NOTE: See Installation Instructions
(WI994).
2. Connect AC power first and then the battery.
3. Configure the keypad (see page 42).
4. Access the Easy Menu Driven (Dealer Program) Mode:
Press
456789 A
Press
NO (
g
) until “
ACTIVATE PROGRAM Y/N
” appears on the
keypad display.
Press
YES (
F
) to Enter Dealer Program Mode. Go to page 5.
Dealer Code
Quick Start (for "K-Series" GEM-K1CA)
1. Refer to the wiring diagram, connect Siren, Aux. Power,
PGM Output, Remote Bus, Earth ground, Zone and Tele-
phone wiring. NOTE: See Installation Instructions
(WI994).
2. Connect AC power first and then the battery.
3. Configure the keypad (see page 42).
4. Access the Easy Menu Driven (Dealer Program) Mode:
Press
456789 R
Press
NO (
Q
) until “
ACTIVATE PROGRAM Y/N
” appears on the
keypad display.
Press
YES (
P
) to Enter Dealer Program Mode. Go to page 5.
Dealer Code
"K Series" GEM-K1CA
G E M I N I
SYSTEM READY
11/01/09 12:00 AM
ARM
ED
C OMP UTE R IZE D SEC URITY SY S TEM
STA
TUS
R
1
2
3
B
4
5
6
C
7
8
9
0
U
NEXT/YES
P
PRIOR/NO
Q
AREA
G
PROGRAMMING
INSTRUCTIONS
R
"Classic" GEM-RP1CAe2
G E M I N I
SYSTEM READY
11/01/09 12:00 AM
ARM
ED
COM PUTER IZE D SE CURI TY SY S TEM
STA
TUS
A
1
2
3
B
4
5
6
C
7
8
9
0
D
NEXT/YES
E
PRIOR/NO
F
AREA
G
Publicly traded on NASDAQ Symbol: NSSC
