Nitsuko NVM-NT, System Manual

Page: 515 / 571

Voice Prompts
NT System Voice Prompts
Chapter 4: Voice Prompts
NT System Guide
487
764. To modify the time that the workday begins for this department,
enter the new time now.
You must enter a two-digit number for the hour, then a two-digit
number for the minute, followed by an A (2) for AM or a P (7) for
PM.
For example: 8 AM would be entered as 0 8 0 0 A.
To erase the workday starting time, press the STAR key (*).
To exit this feature, press the POUND key (#).
764.
765. There is no workday starting time programmed for this department.
To set the time that the workday begins for this department, enter
that time now.
You must enter a two-digit number for the hour, then a two-digit
number for the minute, followed by an A (2) for AM or a P (7) for
PM.
For example: 8 AM would be entered as 0 8 0 0 A.
To exit this feature, press the POUND key (#).
765.
766. The second half of the workday for this department begins at ____. 766. “...department begins at 5 PM.”
767. To modify the time that the second half of the workday begins for
this department, enter the new time now.
You must enter a two-digit number for the hour, then a two-digit
number for the minute, followed by an A (2) for AM or a P (7) for
PM.
For example: Noon would be entered as 1 2 0 0 P.
To erase the mid-workday starting time, press the STAR key (*).
To exit this feature, press the POUND key (#).
767.
768. There is no mid-workday starting time programmed for this
department.
To set the time that the second half of the workday begins for this
department, enter that time now.
You must enter a two-digit number for the hour, then a two-digit
number for the minute, followed by an A (2) for AM or a P (7) for
PM.
For example: Noon would be entered as 1 2 0 0 P.
To exit this feature, press the POUND key (#).
768.
769. The workday for this department ends at ____. 769. “...department ends at 5 PM.”
770. To modify the time that the workday ends for this department, enter
the new time now.
You must enter a two-digit number for the hour, then a two-digit
number for the minute, followed by an A (2) for AM or a P (7) for
PM.
For example: 5 PM would be entered as 0 5 0 0 P.
To erase the workday quitting time, press the STAR key.
To exit this feature, press the POUND key.
770.