Nitsuko NVM-NT, System Manual

Page: 335 / 571

Customizing Port Options
General Tab
Chapter 3: Programming
NT System Guide
307
Options (cont’d)
Self Test
The value in the Self Test check box determines whether this feature will be enabled or dis-
abled. If enabled, the Voice Mail will perform a two-part test at regular intervals as follows:
1. After taking the port off-hook, the Voice Mail will listen for dial tone. If no dial tone
exists, this would constitute a test failure.
2 . But if a dial tone exists, the Voice Mail will dial a digit on the port to see whether the digit
will break the tone. If the dial tone does not get broken, this would constitute a test failure.
Callouts
Callouts includes three check boxes: Allow Lamp, Allow Notification/Wake-Up, and
Allow Network.
Allow Lamp
The value in the Allow Lamp check box determines whether this feature will be enabled or
disabled. When enabled, the port will be used for updating (turning on or off) the Message
Waiting lamps at the extensions.
Availability: All phone systems
Default:
No
Entries:
- Enabled
No
- Disabled
Notes:
It is recommended that you first enable Extension (discussed on
page 305). Then the Voice Mail will dial the first digit of the port’s
extension number, in order to perform the second part of the test.
To set the time interval between the self tests:
1. Select System Options on the Customize menu.
2. Click the General 2 tab.
To perform an immediate self test on the port:
Click the button.
To perform an immediate self test on all ports at once:
Select Immediate All Ports Self Test on the Tools menu.
Availability: All phone systems
Default: Depends on the telephone system installed.
Entries:
- Enabled
No
- Disabled
Notes: Enable Allow Lamp for only the highest-numbered port. For example,
if 4 ports are installed in your system, enable only Port 4.