Nitsuko NVM-NT, System Manual

Page: 366 / 571

Customizing Tenant Options
General Tab
338
NT System Guide
Chapter 3: Programming
Strings (cont’d)
Digital Pager Callback Number
This is the identification string displayed by a digital pager.
Timers (seconds)
Timers (seconds) includes Delay in Dialing Pager Callback Number and Delay before Pager
Announcement.
Digital Pager Callback Number
The value for this parameter sets the duration of the delay in seconds between the last digit
dialed for the pager service number and the first digit of the pager callback number dialed by
the Voice Mail.
Delay before Pager Announcement
The value for this parameter sets the duration of the delay in seconds between the dialing of the
pager service number and the playing of the pager announcement by the Voice Mail. The usual
pager announcement says: Hello, I have a message for (name of person or extension number
to receive the message). You have (message count) messages.
Remote Tenant
Remote Tenant includes the Enabled check box and Access Digits.
Enabled
The value in the Enabled check box determines whether Remote Tenant will be enabled or
disabled. If it is enabled, the Voice Mail can perform lamping and call transfers on remote ten-
ant phones after you enter the access digits. (For details, see Access Digits on the next page.)
Default:
None
Entries: Up to 12 digits
None OR
May include special codes X and M.
X - Phone system code that activates off-hook signaling.
M - Monitored pause (Voice Mail pauses 2 sec. then dials next digit
only if no busy/reorder tone. Otherwise, Voice Mail terminates the
call.)
Notes:
N/A
Default:
13
Entries:
0
–
99
Notes:
N/A
Default:
18
Entries:
0
–
99
Notes: N/A
Availability: Only 384i and Onyx phone systems
Default:
No
Entries:
- Enabled
No
- Disabled
Notes:
N/A