Nitsuko NVM-NT, System Manual

Page: 378 / 571

Viewing and Printing Reports
Auto Attendant Report
350
NT System Guide
Chapter 3: Programming
Auto Attendant Port Report (cont’d)
On the Auto Attendant Port Report dialog box:
1. Enter the number of the last Automated Attendant port you want to display on the report.
2. Click the button to save your selection and display the report.
The Auto Attendant Port report shows how the Automated Attendant will answer calls, when
an Answering Schedule Table (AST) is assigned to a port. Up to 20 different ASTs may be
defined for each port. The report for each port displays the type of mailbox answering the call
and the time when the call is answered. If a Call Routing Mailbox is answering the call, the
report will also show the configuration for the Dial Action Table.
Auto Attendant Trunk Report
But if you selected Trunk, you would see the Auto Attendant Trunk Report dialog box.
On the Auto Attendant Trunk Report dialog box:
1.
In the Ending Mailbox box:
Enter the number of the highest-numbered trunk mailbox you want to see displayed.
2. Click the associated check box for each mailbox type you want to see listed in the report.
3. Click the button to save your entries and display the report.
The Auto Attendant Trunk report shows how the Automated Attendant will answer calls, when
an Answering Schedule Table (AST) is assigned to a trunk as the trunk’s mailbox. The report
displays the type of mailbox answering the call and the time that the call is answered. If a Call
Routing Mailbox is answering the call, the report will also show the configuration for the Dial
Action Table.
Default, Entries,
and Notes:
N/A
Availability: Depends on the telephone system installed.
Default, Entries,
and Notes:
N/A