Nitsuko NVM-NT, System Manual

Page: 277 / 571

Customizing Mailbox Options
Message Center Mailboxes - Message Notification Properties Page
Chapter 3: Programming
NT System Guide
249
Notification Number 1-3 (cont’d)
Call Type
This option lets you enter the Call type for the notification number. Normally, the Voice Mail
looks at the number of digits in the notification number, and enters the Call Type (internal,
local, or long distance) for you. However, in some cases, the Voice Mail may enter the wrong
call type. This will happen when, for example, the notification number is a Speed Dial code
for a long distance call. The Voice Mail sees this code as an Internal call because it is less than
five digits. In actuality, it is a long distance call. In this case, you would have to enter
LD for
the Call type.
This option prevents the Voice Mail from assigning the wrong call type to a notification num-
ber.
Notes:
• The user can enter the notification numbers and the special codes through
the mailbox. (See Message Notification in the User's Guide.)
• To set the duration of the Flash (if a notification number requires one), use
Customize
¿
System Options
¿
Timers
¿
Flash Timer on
page 332.
• If the telephone system is programmed for voice-announced Intercom calls
and the desired notification number is an extension, enter a 1 after the
extension number. This makes Message Notification calls ring the exten-
sion. For example, to have the Voice Mail ring extension 13, enter 131 for
the notification number.
• See also the Notes in Message Notification/Fax Callback on
page 215.
Availability: All versions of the NT Voice Mail.
Default:
Internal
Entries:
Double-click on the word
Internal
next to the Notification number for
which you wish to specify a Call Type. You see a dialog box:
Highlight and then click on the desired Call Type.
Internal
Local
Long Dis. - Long Distance
Notes:
• See also the Notes in
Message Notification/Fax Callback
on
page 215.