Nitsuko NVM-NT, System Manual

Page: 269 / 571

Customizing Mailbox Options
Message Center Mailboxes - General Properties Page
Chapter 3: Programming
NT System Guide
241
Message Center Mailboxes - G eneral Properti es Page
General Properties Page
The following mailbox options are on the General Properties Page and can be programmed for
Guest Mailboxes.
Options
Programmable Options include Mailbox Type, Security Code, Name, Department, Extension,
Distribution List, Next Call Routing Mailbox, Tenant, Directory List, Number of Messages and
Bilingual Mode.
Mailbox Type
This option allows you to assign a mailbox type.
Security Code
This option allows you to assign a password to the Message Center Mailbox. A user must dial
this password to gain access to the Message Center Mailbox and all of its features. After call-
ing into (logging onto) the Message Center Mailbox, a user can change the assigned this Secu-
rity Code if desired.
Availability: All versions of the NT Voice Mail.
Default:
Depends on the phone system that is installed.
Entries: ACD Announce Distribution Message Center
Announcement Fax Network
Call Routing Guest Subscriber
Dir. Dialing Interactive Trunk
Notes: When you change a mailbox type, the Voice Mail erases any messages
the mailbox previously had.
Availability: All versions of the NT Voice Mail.
Default:
None
Entries:
Up to 6 digits
N - None
Notes:
The first time you enter a Security Code, you see the digits on the
screen. If you return to it, you will not see the digits. The Voice Mail
hides each digit with an asterisk (*) for privacy. If the user forgets the
Security Code, you can enter a new one on the screen and tell the Guest
what it is. Or, you can delete the Security Code, and let the user assign
it through the mailbox.