Nitsuko NVM-NT System Manual Download

Page: 219 / 571

Customizing Mailbox Options

Call Routing Mailboxes - Call Handling Properties Page

Chapter 3: Programming

NT System Guide

191

Cal l Rou ti ng Mailboxes - Cal l Handl ing Properties Page

Call Handling Properties Page

To access the Call Handling options:

Click on the

Call Handling

tab. You see the following:

Options

Programmable

Options

are: Dial Action Table, Delay (rings or seconds) before Redirect

Transfer, Directory List to Use, Time Limit for Dialing Commands, and Play Default Messages.

Dial Action Table

This is the Dial Action Table (DAT) number associated with the Call Routing Mailbox.

Availability:

All versions of the NT Voice Mail.

Default:

•

DAT 1 is used by the Call Routing Mailboxes assigned to schedules 1-2

(Morning, Afternoon) in Answering Schedule Tables (ASTs) 1-4.

•

DAT 2 is used by the Call Routing Mailboxes assigned to schedules 3-4

(Evenings, weekend) in ASTs 1-4.

•

DAT 3 is used by the Call Routing Mailbox assigned to the Answering

Schedule Override feature.

Entries:

1 - 500
N - None

Notes:

To set up a Dial Action Table, see Dial Action Tables on page 129.

Summary of Contents for NVM-NT




























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NVM-NT

Reviews:

Related manuals for NVM-NT

Brands by name

Popular brands

Nitsuko NVM-NT, System Manual

Search results

Summary of Contents for NVM-NT

Reviews:

Related manuals for NVM-NT

Brands by name

Popular brands