Nitsuko NVM-NT, System Manual

Page: 311 / 571

Customizing Mailbox Options
Subscriber Mailboxes - Lamp/Logon/Transfer Properties Page
Chapter 3: Programming
NT System Guide
283
Access Digit/Lamp Off String
This option is used with Centralized Voice Mail (Remote Tenant Service) and 384i.
Logon Options
The programmable
Options
is: Use Remote Logon as Direct Logon, First Log In Option and
First Log In Announcement Mailbox.
Use Remote Logon As Direct Logon
Enabling this option allows users to dial a Voice Mail extension number from their Subscriber
extension to log onto their Subscriber Mailbox. If the option is disabled, users must dial their
mailbox number after the Voice Mail extension number to log onto their Subscriber Mailbox.
Availability: . All versions of the NT Voice Mail.
Default:
None
Entries:
N — None
Up to 20 digits including the codes below.
F — Flash
X — Extension
W — Wait for dial tone
S — Wait for any type of sound
P — Pause (the Voice Mail pauses 2 sec, dial next digit)
M — Monitored pause (the Voice Mail pauses 2 sec, dials next digit
only if no busy/reorder tone. If busy/reorder tone, the Voice
Mail terminates the call.)
A — Analyzed pause (the Voice Mail pauses 4 sec, dials next digit only if
no busy/reorder tone. If busy/reorder tone, the Voice Mail terminates
call.)
G — Number of Messages
/ — Marks beginning of Lamp String
$ — Escape (Not currently supported. Only applies to Mitel or
Norstar phone systems, using Dialogic D42SX or NS cards.)
Availability: All versions of the NT Voice Mail.
May not apply to all phone systems. See the Integration Guide for
specifics.
Default: Disabled. The option is disabled as indicated by no check mark ( ) in
the radio box.
Entries:
Clicking in the radio box toggles between de-selecting (no check
mark,
) and selecting the option (has a check mark, ).
Notes:
See the User’s Guide for instructions on calling (logging onto) a mail-
box.