manualshive.com logo in svg

Nitsuko NVM-NT, System Manual

The Nitsuko NVM-NT System Manual is a comprehensive guide for operating this advanced telecommunications product. Packed with essential information, this manual is available for free download from our website, ensuring you have all the necessary resources to maximize the potential of your Nitsuko NVM-NT.

Share
Download
background image

Customizing Mailbox Options

Interactive Mailboxes - Interactive Properties Page

238

NT System Guide

Chapter 3: Programming

Time Limit for Dialing Commands Responses

This is the amount of time a caller has to respond to the Interactive prompts. If the caller does 
not dial a code within this time limit, the Voice Mail replays the prompt.

Closing Announcement Mailbox

The Voice Mail goes to this mailbox and plays its announcement after the caller records the last 
response or after the reference number plays. A typical closing announcement may say: Thank 
your for ordering with ABC company. For information on the reference number, see Refer-
ence Number for Call below.

Reference Number for Call

This option assigns a reference number to a set of responses. After the person records the last 
response, the Voice Mail says this twice: Please note, the reference number for your call is 
XXXX YYYY, where XXXX is the time (in a 24-hour clock), and YYYY is the identification 
number.  The Voice Mail stores the reference number with the response set. To hear the refer-
ence number while you listen to a response set, you press 

T I.

 See Using the Listening Options 

in the User's Guide.

Availability:

All versions of the NT Voice Mail

Default:

5 (seconds)

Entries:

0-99 (seconds)

Notes:

This option overrides the Time limit for dialing commands in System 
Options.

Availability:

All versions of the NT Voice Mail

Default:

None

Entries:

Any Announcement Mailbox (up to 7 digits in length)

N - None

Notes:

•

To create and customize the Announcement Mailbox, use 

 

Customize 

 

¿

Mailbox Options 

¿

Add 

or 

Edit 

(See

 

Announcement Mailboxes on  Description on page 183.).

• To record the Announcement Message,  see Recording an Announce-

ment Message use the System Administrator Menu. 

Availability:

All versions of the NT Voice Mail

Default:

The option is not selected.

Entries:

•

To select the option, click on it so that a check mark ( 

) appears in the 

radio box.

•

To de-select the option, click on it so that radio box does not contain a  

check mark ( 

).

Notes:

N/A.

Summary of Contents for NVM-NT




























































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NVM-NT

NEC IntraMail Quick Reference preview
IntraMail
Brand: NEC Pages: 2

Brands by name

Popular brands

Load more brands