Nitsuko NVM-NT System Manual Download

Page: 506 / 571

Voice Prompts

NT System Voice Prompts

478

NT System Guide

Chapter 4: Voice Prompts

624. _____ will receive this FAX message.

624. “(Mailbox 303) will receive this

message.”

625. The following Return Receipt arrived on _____.

625. “...arrived on April 13th.”

626. To listen to the first message you sent, press

L (5)

To erase the first message, press

E (3)

To exit this feature, press the POUND key (#).

626.

627. To erase the message, press

E (3)

To listen to the next message you sent, press

L (5)

To exit this feature, press the POUND key (#).

627.

628. The message cannot be erased at this time because the recipient

mailbox is currently in use.

628.

629. The mailbox has been tagged for Return Receipt.

629.

630. This message may not be tagged for Return Receipt because you

have not recorded a comment.

630.

631. This Return Receipt arrived on _____.

631. “...arrived on April 13th.”

632. Hundred

632. Used in plural form: “Two hundred”

633. Thousand

633. Used in plural form: “Two thousand”

634. Million

634. Used in plural form: “Two million”

635. Billion (Needed for English).

635. Used in plural form: “Two billion”

636. One ____

636. “One hundred twenty”

637. One ____

637. “One thousand twenty-five”

638. _____ at _____

638. Needed only for Spanish: “(The 5th of

May) at (10:00)”

639. The first hard disk in your voice mail system has failed.

Hard disk mirroring has been turned off.
Please replace the first hard disk with a functioning one, and turn
on hard disk mirroring.

639.

640. The second hard disk in your voice mail system has failed.

Hard disk mirroring has been turned off.
Please replace the second hard disk with a functioning one, and
turn on hard disk mirroring.

640.

641. A hard disk in your voice mail system has failed.

Hard disk mirroring has been turned off.
Please replace the failed hard disk with a functioning one, and turn
on hard disk mirroring.

641.

642. _____ hours _____

642. Used for Thai military time.

643. _____ minutes (used for Thai)

643. Used for Thai military time.

644. To specify the extension number, press the

STAR

key (*).

To exit this feature, press the

POUND

key (#).

644.

645. Please dial the extension number.

To dial the Name of an extension, press the

STAR

key (*).

To exit this feature, press the

POUND

key (#).

645.

646. To specify the number of the recipient, press the

STAR

key (*).

To exit this feature, press the

POUND

key (#).

646.

Summary of Contents for NVM-NT




























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NVM-NT

Reviews:

Related manuals for NVM-NT

Brands by name

Popular brands

Nitsuko NVM-NT, System Manual

Search results

Summary of Contents for NVM-NT

Reviews:

Related manuals for NVM-NT

Brands by name

Popular brands