Nitsuko NVM-NT System Manual Download

Page: 328 / 571

Customizing Mailbox Options

Trunk Mailboxes - General Properties Page

300

NT System Guide

Chapter 3: Programming

Tru nk Mail boxes - General Properties Page

General Properties Page

The following mailbox options are on the General Properties Page and can be programmed for
Trunk Mailboxes.

Options

Programmable

Options

include Mailbox Type, Name, Department, Extension, Tenant, Directory

List, Bilingual Mode and Answering Schedule Table.

Mailbox Type

This option allows you to assign a mailbox type.

Name

This option allows you to assign a name to the Trunk Mailbox (such as WATS). The name
appears on system reports.

Department

This option identifies the department associated with the Trunk Mailbox.

Availability:

All versions of the NT Voice Mail.

Default:

Depends on the phone system that is installed.

Entries:

ACD Announce

Distribution

Message Center

Announcement

Fax

Network

Call Routing

Guest

Subscriber

Dir. Dialing

Interactive

Trunk

Notes:

When you change a mailbox type, the Voice Mail erases any messages
the mailbox previously had.

Availability:

All versions of the NT Voice Mail.

Default:

None

Entries:

Up to 25 characters (numbers, letters, blanks, punctuation)

N - None

Notes:

N/A

Availability:

All versions of the NT Voice Mail.

Default:

None

Entries:

Up to 10 characters (numbers, letters, blanks, punctuation)

N - None

Notes:

N/A

Summary of Contents for NVM-NT




























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NVM-NT

Reviews:

Related manuals for NVM-NT

Brands by name

Popular brands

Nitsuko NVM-NT, System Manual

Search results

Summary of Contents for NVM-NT

Reviews:

Related manuals for NVM-NT

Brands by name

Popular brands