Nitsuko NVM-NT System Manual Download | Manualshive

Page: 113 / 571

background image

The NT Voice Mail Features

User Features

Chapter 2: Features

NT System Guide

85

Checking/Deleting a Message

After recording and sending a message, the message sender can check to see whether the
intended recipient listened to it by using one of the following features:

Q

RS (Record and Send)

Q

MF (Message Forward)

Q

FD (Future Delivery).

If the intended recipient has not listened to the message, the message sender can delete it. The
message sender can listen to the message before deleting it.

In the User’s Guide, see also:

Checking/Deleting a Message.

Exiting a Mailbox

Mailbox users can exit their mailbox by hanging up or by pressing a single key. If they press
the exit key, they can then either:

Q

Change their minds and return to their own mailboxes.
OR

Q

Go to the Automated Attendant.

In the Programming, see also:

Customizing Mailbox Options: Subscriber Mailboxes starting on page 299 and Next Call
Routing Mailbox, starting on page 185.

Forwarding Calls to a Mailbox

Users can forward their incoming calls to their own mailboxes. After the NT Voice Mail
answers the call, the caller can leave a message. This feature should be used only if the Voice
Mail is not set up with Automated Attendant.

In the User's Guide, see also:

Forwarding Your Calls to Your Mailbox.

In the Programming, see also:

Customizing System Options, Timers tab, Wait Protocol Digit (seconds), page 331

Getting Recorded Help

Mailbox users can get recorded help, if they press an incorrect code or forget what code to
press.

In the User's Guide, see also:

Getting Recorded Help.

Getting the Time and Date

Mailbox users can get the time and date from their mailboxes.

See also:

System Time and Date, page 82
Getting the Time and Date in the User’s Guide.

Availability:

All NT Voice Mail systems unless otherwise noted.

Availability:

All NT Voice Mail systems unless otherwise noted.

Availability:

All NT Voice Mail systems unless otherwise noted.

Availability:

All NT Voice Mail systems unless otherwise noted.

Availability:

All NT Voice Mail systems unless otherwise noted.

«
...
111
112
113
114
115
...
»

Summary of Contents for NVM-NT




























































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NVM-NT

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands