Nitsuko NVM-NT, System Manual

Page: 353 / 571

Customizing System Options
Dial StringsTab
Chapter 3: Programming
NT System Guide
325
Lamp Strings (cont’d)
Off
This string is used by the phone system to turn off the Message Lamp at an extension.
Miscellaneous Strings
The Miscellaneous Strings option includes the following strings: Hang Up, Call Pickup,
Ringdown, and Off Hook Call Announce.
Hang Up
Hang Up is a string of codes that causes the Voice Mail to terminate a call by hanging up.
Default:
#X00
Entries:
None
Up to 20 digits including the codes below:
F - Flash
W - Wait for dial tone
S - Wait for any type of sound
P - Pause (After a 2 sec pause, the Voice Mail dials the next digit.)
M - Monitored pause (After a 2 sec pause, the Voice Mail dials the next
digit if no busy/reorder. Otherwise, Voice Mail ends the call.)
A - Analyzed pause (After a 4 sec pause, the Voice Mail dials the next
digit if no busy/reorder. Otherwise, Voice Mail ends the call.)
X - The Voice Mail replaces the “X” with an extension number, so that
the Voice Mail will know which extension should have its lamp
turned on.
G - Number of messages in a mailbox. (This number appears on any
Display Phones that can show the number of messages in the mail-
box.)
Notes:
Any Lamp Off string must include an “X.”
Availability: All phone systems
Default: 999
Entries: Up to 20 digits (Use the Hang Up string in your phone system.
None
Notes: If the Hang Up string matches a mailbox number or the first few digits
of a mailbox number, you must do one of the following:
Q
Change the mailbox number
Q
Change the Hang Up string in the phone system
Q
Not use the mailbox number.