Nitsuko NVM-NT System Manual Download | Manualshive

Page: 111 / 571

background image

The NT Voice Mail Features

User Features

Chapter 2: Features

NT System Guide

83

User Features

Auto Forward

When Auto Forward is enabled, the NT Voice Mail will forward a user’s messages to a partner
mailbox (a mailbox belonging to another user). As a result, if the user goes on vacation, the
partner can immediately respond to any messages that the vacationing user receives.

Programming

Q

Customizing Mailbox Options, Edit, # of Subscriber/Guest/Message Center Mailbox,
Messaging tab
Select Fwd Save setting for Auto Forwarding, see page 278, page 221, and page 253,
respectively.

In the User’s Guide, see also:

Changing the Auto Forward Option.

Auto Help

Users can turn off some of the voice prompts (automatic help menus). This is handy when
users become familiar with the Voice Mail and no longer need to hear all of the voice prompts
to help them use the system.

In the User’s Guide, see also:

Changing the Auto Help.

Auto Time-Stamp

When Auto Time-Stamp is turned on by the user, the Voice Mail will play the time and date
when the message was left and the name (or number) of the message sender, after it plays the
message.

If Auto Time-Stamp is turned off, however, a user must press T I (8 4) during or after a mes-
sage in order to get this information.

In the User’s Guide, see also:

Changing the Auto Time-Stamp Option.

Call Announcing

A user can turn Call Announcing on or off for Automated Attendant callers. When it is on, the
Automated Attendant lets an extension user know who is calling. The extension user can then
either accept the call or re-route it to the Automated Attendant.

In the User’s Guide, see also:

Changing the Call Announcing Option.

In Programming, see also:

Customizing Mailbox Options, Subscriber Mailbox, Call Announcing starting on page 294.

Customizing System Options, Dial Strings tab: Off Hook Call Announce, page 327.

Customizing System Options, Timers tab: Call Announce Message Length (seconds),
page 329.

Availability:

All NT Voice Mail systems unless otherwise noted.

Availability:

All NT Voice Mail systems unless otherwise noted.

Availability:

All NT Voice Mail systems unless otherwise noted.

Availability:

All NT Voice Mail systems unless otherwise noted.

«
...
109
110
111
112
113
...
»

Summary of Contents for NVM-NT




























































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NVM-NT

Unity Express 8.6

Brand: Cisco Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands