Nitsuko NVM-NT, System Manual

Page: 423 / 571

Using Call Adaptation Options
Call Parameters 1 Tab
Chapter 3: Programming
NT System Guide
395
Call Parameters 1 Tab
Call Parameter values control how the Voice Mail will process a call. Unless otherwise noted the
default value for each Call Parameter depends on which phone system is installed. Although you
can edit any Call Parameter value, you really shouldn’t change these values unless advised to do so
by the Voice Mail manufacturer or by the text on the following pages. The text provides a brief
description of each Call Parameter whose value you may want to change.
After you click the Call Parameters 1 tab, you will see a dialog box tab that is similar to the one
shown below:
The Call Parameters 1 tab displays these parameters:
CallProgDly
The value for this parameter determines the minimum time interval that the Voice Mail will wait
before beginning the PCPM analysis for making calls into the integrated PBX. This value repre-
sents increments of 55 milliseconds, so that a setting of “1” would cause the Voice Mail to wait 55
milliseconds.
MonPauseDur
The value for this parameter determines the minimum duration of the monitored pause (M) in the
dial string, before the Voice Mail will recognize the pause as a monitored pause. The recommended
range of values is 50 through 400, entered in multiples of 10 milliseconds.
MinMsgLength
The value for this parameter determines the minimum length of time in seconds for any message
that the Voice Mail will keep. The Voice Mail will discard any message shorter than this length.