manualshive.com logo in svg

Nitsuko NVM-NT, System Manual

The Nitsuko NVM-NT System Manual is a comprehensive guide for operating this advanced telecommunications product. Packed with essential information, this manual is available for free download from our website, ensuring you have all the necessary resources to maximize the potential of your Nitsuko NVM-NT.

Share
Download
background image

Customizing Mailbox Options

Subscriber Mailboxes - Lamp/Logon/Transfer Properties Page

284

NT System Guide

Chapter 3: Programming

First Log In Option

If this option is selected, the Voice Mail plays an Announcement Message when a user logs 
onto a Subscriber  Mailbox for the first time. The Voice Mail allows one of two options:

Q

Option 1 plays the Announcement Message only.

Q

Option 2 plays the Announcement Message, then explains how to record a Mailbox 
Greeting/Name, and assign a Security Code.

First Log In Announcement Mailbox

This is the number of the Announcement Mailbox that plays the Announcement Message when 
the 

First Log In Option

 (above) is enabled.

 

Availability:

All versions of the NT Voice Mail.
This option only applies to Subscriber and Guest Mailboxes.

Default:

None

Entries:

Click inside the dialog box next to Option. You see your choices.
 Click on the desired entry.

None

Option 1

Option 2

Notes:

•

The Voice Mail plays the Announcement Message that is recorded for the 

First Log In Announcement Mailbox (see previous paragraph).

•

If the Announcement Message is not recorded for Option 2, the Voice 

Mail still explains how to use the options.

•

If users log onto their mailboxes for the first time and immediately hang 

up without completing the tutorial, the tutorial will not play again.

Availability:

All versions of the NT Voice Mail.

Default:

None

Entries:

An Announcement Mailbox Number (Up to 7 digits).
N - None

Notes:

•

To create the Announcement Mailbox, use
 

Customize

 

¿

Mailbox Options

 

¿

Add/Edit

.  See page 

page 183 for more information about Announcement Mailboxes.  
Be sure to set the following options:
— 

Next Call Routing Mailbox

 should be set to None.

—

 Hang Up After

 should not be selected.

— 

Security Code

 should be set to None.

Keep in mind that the Voice Mail automatically fills in the Security 
Code if you assigned one during the installation procedure.  You 
will have to delete it.

•

To record the Announcement Message, use the System Administra-
tor’s Menu.

Summary of Contents for NVM-NT




























































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NVM-NT

NEC VANGARD i-Series Quick Setup Manual preview
VANGARD i-Series
Brand: NEC Pages: 90

Brands by name

Popular brands

Load more brands