Nitsuko NVM-NT, System Manual

Page: 546 / 571

Installing and/or Configuring Other Software
Installing Dialogic System Software
518
NT System Guide
Chapter 5: Maintenance
Installing Dialogic System Software
The following procedure is written for Dialogic Ver 3.1 for ISA cards and assumes that only one
D/41H card is installed in the system.
To install the Dialogic System software:
Q
Insert the CD-ROM into the CD drive.
Wait a minute for the Autorun program to run.
If the software doesn’t start automatically:
1. Click the button, and select Run.
2. On the Run dialog box:
Enter d:\setup in the Open box, and click the button.
3. On the Welcome to Dialogic Setup window:
Click the button.
4. On the Registration window:
Enter your initials in the Name box and your company name in the Company box. Click the
button.
5. On the Setup Options window:
Click the COMPACT (22 MByte) button.
6. Click the button on the Destination Location window, the Program Group
Folder window, and the Setup Options Summary window.
The Installation program will copy files from the CD-ROM onto the hard disk.
7. On the Dialogic Setup Finish Options window:
Uncheck the View Release Notes check box, and click the button.
8. On the Question dialog box asking if you would like to install GammaLink Fax:
Click the No button.
9. On the Question dialog box asking if you would like to install SpeechWorks:
Click the No button.
10. On the Information dialog box that says, Setup Complete:
Click the button.
11. Close the Dialogic System Software window.