Nitsuko NVM-NT Page 374 System Manual Download

Page: 374 / 571

Customizing Tenant Options

Fax On-Demand Cover Page Tab

346

NT System Guide

Chapter 3: Programming

Cover Page Text

In the Cover Page Text box, you can design (customize) a cover page that will be displayed in front
of each FAX document sent as a FAX callout.

When you have finished entering Fax On-Demand Cover Page infor-
mation about this tenant:

click the

button to apply your entries to the current tenant and move to the dialog

box for the next tenant.

To apply your entries to the current dialog box and remain there:

Click the

button.

To save your entries on the current dialog box and return to a previ-
ous dialog box:

Click the

button.

To save your entries on the current dialog box and then move to
another dialog box:

Click the

button,

enter the tenant number where you want to move,

and click the

button.

When you have finished customizing this information for the last ten-
ant:

Click the

button to cause the Voice Mail to apply your entries to this tenant, remove

the dialog box from the screen, and return to the Voice Mail Main window.

Default:

No entry

Entries:

Up to 60 characters per line.
Up to 15 lines

Notes:

N/A

Summary of Contents for NVM-NT




























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NVM-NT

Reviews:

Related manuals for NVM-NT

Brands by name

Popular brands

Nitsuko NVM-NT, System Manual

Search results

Summary of Contents for NVM-NT

Reviews:

Related manuals for NVM-NT

Brands by name

Popular brands