Nitsuko NVM-NT System Manual Download

Page: 265 / 571

Customizing Mailbox Options

Interactive Mailboxes - Interactive Properties Page

Chapter 3: Programming

NT System Guide

237

Responses, Mailbox for (cont’d)

If the “After each” mode is on, the Voice Mail then does the following:

If the caller presses

, the Voice Mail goes to the next interactive prompt. If the caller is at the last

prompt, the Voice Mail goes to the reference number and/or the closing announcement (if
enabled).

If the caller presses

, the Voice Mail erases the response and lets the caller re-record it.

If the “After all” mode is on, the Voice Mail then does the following:

If the caller presses

, the Voice Mail plays the reference number and/or the closing

announcement (if enabled).

If the caller presses

, the Voice Mail erases all the responses and lets the caller re-record

them, starting with the first one.

Responses, Record Incomplete

This option, if enabled, stores an incomplete set of responses as long as the caller records at
least one response.

Default:

None

Entries:

Click in the box next to Mailbox for. You see your choices:

After each
(Review after each response is recorded)

After all
(Review after all responses are recorded)

Notes:

The Voice Mail stores a response set as long as the caller records at least
one response.

Availability:

All versions of the NT Voice Mail

Default:

The option is not selected.

Entries:

•

To select the option, click on it so that a check mark (

) appears in the

radio box.

•

To de-select the option, click on it so that radio box does not contain a

check mark (

Notes:

N/A.

Summary of Contents for NVM-NT




























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NVM-NT

Reviews:

Related manuals for NVM-NT

Brands by name

Popular brands

Nitsuko NVM-NT, System Manual

Search results

Summary of Contents for NVM-NT

Reviews:

Related manuals for NVM-NT

Brands by name

Popular brands