Ross Synergy MD, Инструкция по эксплуатации, Страница: 99 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Physical Installation • 3–35
Please note:
• All relay contacts are normally open.
• Tally relay contacts are rated to a max. of 10 VA (100 V
max,
0.5 A
max
) into a
non-inductive load.
• Make connections straight on. Leave 4 inches of clearance behind the control panel.
• Be sure to fasten the clips to hold each connector in place. Run all tally cables in
accordance with good engineering practice, and ensure that the cable will not be
subjected to physical abuse.
Synergy Optional TALLY 3 Port Pinouts
Pin # Function Pin # Function
1 TALLY 37 14 TALLY 38
2 TALLY 39 15 TALLY 40
3 TALLY 41 16 TALLY 42
4 TALLY 43 17 TALLY 44
5 TALLY 45 18 TALLY 46
6 TALLY 47 19 TALLY 48
7 TALLY 49 20 TALLY 50
8 TALLY 51 21 TALLY 52
9 TALLY 53 22 TALLY 54
10 TALLY COMMON 23 TALLY COMMON
11 TALLY COMMON 24 TALLY COMMON
12 TALLY COMMON 25 TALLY COMMON
13 TALLY COMMON
Synergy Optional TALLY 4 Port Pinouts
Pin # Function Pin # Function
1 TALLY 55 14 TALLY 56
2 TALLY 57 15 TALLY 58
3 TALLY 59 16 TALLY 60
4 TALLY 61 17 TALLY 62
5 TALLY 63 18 TALLY 64
6 TALLY 65 19 TALLY 66
7 TALLY 67 20 TALLY 68
8 TALLY 69 21 TALLY 70
9 TALLY 71 22 TALLY 72
10 TALLY COMMON 23 TALLY COMMON
11 TALLY COMMON 24 TALLY COMMON
12 TALLY COMMON 25 TALLY COMMON
13 TALLY COMMON