Ross Synergy MD, Инструкция по эксплуатации, Страница: 158 / 388

6–22 • Software Upgrades and Options Synergy Q/MD Engineering Manual (v9.1 MD)
4. Select the storage device that you want to use to recall the files from as follows:
• Use the top knob to select the storage device you want to recall the files from. You
can select between the following:
~
Hard Drive
— This option will allow you to recall the files from the internal
hard drive.
~
USB
— This option allows you to name the files on a USB key plugged into
the switcher panel USB port.
• If you are recalling from the hard drive, use the
Set Names
knob to select a Setup ,
or location, from which to recall the files. There are 100 (
00
through
99
) setups
available from which to recall files.
5. Press
Recall
to display the Disk Recall Menu 1-2 .
Disk Recall Menu 1-2
6. Select the category of registers that you want to store as follows:
• Press
All
to recall all categories of registers from a storage device.
• Press
Memories
to recall only Memory Registers from a storage device.
• Press Custom Controls to recall only Custom Control Registers from a storage
device.
• Press
Personality
to recall only Personality Registers from a storage device.
• Press
VTR Clips
to recall only VTR Clip Registers from a storage device.
• Press Installation to recall only Installation Registers from a storage device.
• Press
3D Sequences
to recall only 3D Sequence Registers from a storage device.
• Press
Bus Maps
to recall only Bus Maps from a storage device.
This completes the procedure for recalling your setups from a storage device.
Deleting Existing Setups
Switcher file sets that have been copied to an external computer can be deleted to allow for more
storage space for newer setups.
Use the following procedure to delete an existing setup on an external computer:
1. On your computer, open your Web Browser and, in the address bar, type in the IP
address of your switcher to display the Splash screen and the Synergy MD/X Web
Interface Login Window .
2. In the Name field enter the Synergy MD/X Web Interface user name.