Ross Synergy MD, Инструкция по эксплуатации, Страница: 174 / 388

7–4 • BNC Configuration and Check Synergy Q/MD Engineering Manual (v9.1 MD)
5. Press
Preset Names
to display the Preset Names Menu .
Preset Names Menu
• Use the middle knob to scroll the list of preset names.
• Press Select to accept the preset name, or press Cancel to return.
• If you select a preset name, you automatically return to the BNC Names Menu ,
where your selection appears in the New Name Field , with the cursor positioned
after the name.
6. To name your input (or to add additional characters after a preset name), use the
Horizontal and Vertical knobs and the soft keys listed below to select the desired
character. The highlighted position in the New Name Field changes as you select each
character. Please note:
• The maximum number of characters allowed is eight.
• Press Space to add a space at the current position. If a letter is in the active
position, it will be deleted.
• Press Prev Letter to move the highlight one space to the left.
• Press Next Letter to move the highlight one space to the right.
7. When the name entered is as desired, press Accept New Name .
8. Repeat steps 3 through 7 for each additional input that you want to name. It is
recommended at this point that you name each input to the switcher.
This completes the procedure for naming inputs.
Restoring Default BNC Names
The factory default format for all BNC names is: [ BNC ] [ space ] [ number ] (eg. BNC C01 or
BNC D16 ). When setting the BNC name to its default format, the change applies only to the selected
BNC number. If you have more than one BNC name to change, you must repeat the procedure for
each one.
Operating
Tip
As you rotate the Horizontal and Vertical knobs, the crosspoint
buttons on MLE 1 will light. You can also press the MLE pushbutton
to select a character.
Note
If you change the input name without first pressing Accept New
Name , an error message is displayed.