Ross Synergy MD, Инструкция по эксплуатации, Страница: 283 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Custom Controls • 10–37
• Use the
Command
knob to select the command you want to send to the selected
Pbus device. You can select between the following:
~
Trigger
— Select this option to have a specific trigger value (
0
to
15
) sent to
the Pbus device when the custom control is run.
~
Store
— Select this option to have the Pbus device store a specific memory
value (
0
to
4095
) when the custom control is run.
~
Recall
— Select this option to have the Pbus device recall a specific memory
value (
0
to
4095
) when the custom control is run.
• Use the
Value
knob to select the Trigger , Store or Recall Value that you want.
7. Press
Insert
to enter the Pbus command into your custom control macro.
8. Press
UP ONE
to return to the Custom Controls Recording Menu .
Custom Controls — Recording Menu
9. Press Finish Recording to finish recording to the selected custom control. The custom
control button will stop flashing.
This completes the procedure for creating a custom control that will send commands to devices using
the Pbus protocol.
Note Although the Pbus protocol allows for memories up to 4095, your
specific device may not support this many. Refer to the documentation
that came with your device to determine the number of memories you
have available.