Ross Synergy MD, Инструкция по эксплуатации, Страница: 290 / 388

10–44 • Custom Controls Synergy Q/MD Engineering Manual (v9.1 MD)
5. Press
Modify Event
to display the Modify Event Menu .
Edit Custom Control — Modify Event Menu (Pause CC)
6. Modify the event in the same manner that you inserted it originally. Refer to the section
“ Programming Special Functions ” on page 10-18 for more information on inserting
special functions.
7. Press
Insert
to save your changes.
8. Press
UP ONE
to display the Inserting Menu .
Custom Controls — Inserting Menu
9. Press Finish Inserting to finish inserting to the selected custom control.
This completes the procedure for modifying a custom control event.
Inserting Events
The Edit Custom Control Inserting Menu provides a means by which you can append a variety of
events to an already existing custom control macro. Events are inserted immediately before the event
that is currently highlighted in the scroll area.
Use the following procedure to insert events into a custom control:
1. Navigate to the Custom Controls Menu 1-2 as follows:
• Press HOME B Custom Controls .
2. Select the Custom Control bank and button that you want to insert an event into as
follows:
• Use the Bank knob to select the custom control bank that you want to edit the
custom control on.
Operating
Tip
Press Cancel Inserting to return to the previous menu without
recording any of the insertions you made.